Medium pressure lifting bags (< 3 bar)

For applications requiring “moderate” lifting forces, we offer lifting bags with 3 bar (43 PSI) inflation pressure.

These bags are very thin (12mm/0.47”) and due to the vulcanization manufacturing process the final product is highly homogeneous and guarantees a long service life (more than 10 years in some cases).

NPVC rubber coated fabric

Excellent UV resistance
Excellent Ozone resistance

Options :

Vamac : for temperature up to 140°C
FDA additional coating: for “food industry” application

Vulcanization under vacuum in an autoclave

Dimensions restrictions:

Square models : 2500 * 2500 mm
Rectangular models : 5500 * 2500 mm
Circular models dia. : 2500 mm

Because of the assembly process, a “dead area” (= no inflation zone) is located around the edges of the lifting bag.

This dead area has to be deducted from the working surface of the bag before calculating the available lift force.

Inflation:

Threaded Inflation stems position 1/4″ ou 3/4″

Schrader Valve

The inflation stem can be placed on the face or the edge. If on the edge, a short tube of copper with a quick connect coupler at the end will be provided; or an integrated steel insert where a stem will be mounted.

Note : The inflation stem located on the edge will increase the “dead area” dimensions.

Miscellaneous: